全国服务热线：199 0247 3302
邮箱：ailand@dgailand.com
业务咨询：199 0247 3302
技术咨询：135 8090 5315
地址：广东省东莞市松山湖园区科技三路7号 中国南方应急大厦1栋607室
结构粘接和弹性密封，较高要求的粘接。
更均匀的应力分布。
对粘接材料的表面没有改变。
减轻整体的重量。
通过填充效果，减少不同材料之间的腐蚀风险。
提升结构粘接的可靠性和耐久性。
| product model | > product features |
| LOCTITE 326 | faster fixed time of 1 minute. Higher structural bonding strength 105Mpa. No mixing is required, use with Accelerator 7649. Moderate viscosity, general-purpose magnet bonding glue. |
| LOCTITE 3342 | faster fixed time of 3 minutes. Higher structural bonding strength 15Mpa. No mixing required, use with Accelerator 7380. Medium viscosity, excellent thermal strength 150°C. |
| LOCTITE AA 3038 | Longer initial fixing time of 40 minutes. Structural bonding strength 10Mpa. 10:1 ratio mixing. Low viscosity, suitable for bonding polyolefin materials. |
| LOCTITE E-00NS | faster operation time of 3 minutes, 10 minutes fixed time. There is no collapse after dispensing, and the anti-drooping effect is good. Colorless and transparent, high viscosity. |
| LOCTITE E-214HP | It needs to be heated for a certain amount of time to cure. High structural bonding strength > 30Mpa. Suitable for bonding carbon fiber materials. Gray, excellent overall performance. |
| LOCTITE U-30HV | Impact resistance, good toughness 200%-300%. Low linearity and volume shrinkage of 3%. Suitable for bonding a variety of materials. Small packages are suitable for automated process production. |
| LOCTITE SI 595 | One-component deoxidized silica, colorless. The crust time is 45 minutes, and the shear strength reaches 2.5Mpa. The elongation at break reaches 275%. It has a temperature resistance of up to 250°C and can be used for elastic bonding of a variety of substrates and seals. |
| LOCTITE HY 4060GY | No need for mixing nozzle and sizing equipment, simple mixing, Suitable for quick patching operating environments. Curing is not affected by the sizing environment. The surface can be processed after curing. Good gap filling capacity, up to 5mm. Alternative to traditional two-component 5-minute epoxy. Fast, 5-minute curing. Bonds most substrates, including metals, most plastics, and rubbers. |
| LOCTITE HY 4070 | Fits most substrates: metals, most plastics, and rubber. < 60s early solid. Strength increases rapidly (full solid < 24 hours). Excellent gap filling capacity, up to 5mm. Temperature and moisture resistance, chemical solvent resistance. |
| LOCTITE HY4080 | low odor, non-hazardous goods (alternative to MMA). Excellent impact resistance, greater than 19J. Suitable for a range of substrates: metals, most plastics and rubber. Medium initial solidification speed (~10 min). |
| LOCTITE HY 4090 | suitable for a range of substrates: metals, most plastics and rubber. The initial solidification speed is fast, reaching 5 minutes. Temperature resistance (up to 150°C), moisture resistance, chemical solvent resistance. Can be used in low temperature environments, 5°C. |
| TEROSON PU 8592 | Thixotropic paste, black. After curing, the shear strength reaches 7Mpa, and the tensile strength reaches 4Mpa. Elongation at break reaches 400%. Good acid and alkali resistance, UV performance, can be used for elastic bonding and sealing. |
| TECHNOMELT PUR 4663 | Impact resistance, good toughness of 500%. The tensile strength of the body can reach 8Mpa. Suitable for bonding a variety of materials. |
